SHV Jack Female Right Angle Connector Receptacle (PCB Mount)
- Part Number
- SVJ-05L
- Series
- SHV
- Gender
- Jack
- Orientation
- Right Angle
- Mounting
- PCB Mount
SHV CONNECTORS
The SHV connector represents “Safe High Voltage”. SHV connectors are used in laboratory settings for voltages and currents beyond the capacity of BNC and MHV connectors. The insulation geometry of SHV connectors makes them safer for handling high voltage than MHV connectors, by preventing accidental contact with the live conductor in an unmated connector or plug. SHV connectors are suitable for all high voltage applications up to 5 kV DC or 3.5 kV RMS. These connectors are typically used in nuclear instruments or test and measurement equipment. Voltages are valid for both, the mated and the unmated condition. Panel or bulkhead solder jacks can be pre-positioned in a panel or bulkhead since no crimping is preparation is required.
FEATURES AND BENEFITS
- Heat resistant insulators
- Quick connect/disconnect bayonet coupling
- Positive insulation grip
APPLICATIONS
- High voltage
- Weatherproof conditions required
SHV CONNECTOR SPECIFICATIONS
| SHV Connectors Specifications – 50Ohm | |
| Impedance | 50 Ohm |
| Frequency Range | DC to 300 MHz |
| Power rating at 1 GHz: | 1000W |
| Dielectric withstanding voltage (at sea level) | 5.0 kV rms, 50 Hz (depending on cable) |
| Working voltage (at sea level) | 3.5 kV rms, 50 Hz (depending on cable) |
| Insulation resistance | 1 TOhm |
Note: These characteristics are typical and may not apply to all connectors.
Showing the single result