7-16 CONNECTORS
The 7-16 series was named from its metric dimensions of the connector interface: 7mm OD of inner contact and 16 mm ID of outer contact. The 7-16 connectors are robust, stable, and ideal for applications where vibration resistance and environmental protection are essential, providing superior performance for return loss and intermodulation distortion.
Due to the delicate design of 7-16, this series of RF connectors can minimize signal distortion and make them especially suitable for base stations and broadcast communication systems.
FEATURES AND BENEFITS
- Large form factor interface supports high power applications
- Excellent low PIM performance
- Waterproof IP68 construction protects against dust and water
- Self-flaring design ensures ease of installation with standard hand tool
- Pre-assembled gasket protects against dust (P68) and water (IP68) per IEC 169
- Silver-plated contacts and silver or white bronze-plated bodies
- Delivers high conductivity and corrosion resistance
APPLICATIONS
- Wireless Infrastructure
- Lightning Protection
- Base Stations
- Satellite Communications
- Antenna Systems
7-16 CONNECTOR SPECIFICATIONS
| 7-16 Connectors Specifications – 50Ohm | |
| mpedance | 50 Ohm |
| Frequency Range | DC – 7.5 GHz |
| Voltage Rating | 500 Volts RMS Continuous |
| Dielectric Withstanding Voltage | 2300 VRMS Max |
| VSWR (Return Loss) | |
| DC – 500 MHv | 1.052 (-32 dB) Max |
| 500 MHz – 4 GHz | 1.2 (-21 dB) Max |
| 4 – 7 GHz | 1.33 (-17 dB) Max |
| Insulation Resistance | 5000 MΩ Min |
| Center Contact Resistance | 0.4 mΩ Max |
| Outer Contact Resistance | 0.2 mΩ Max |
| RF Leakage | -128 dB Max (DC – 1 GHz) |
| Insertion Loss | .05 √(f(GHz)) dB Max |
| Passive Intermodulation (PIM) | -166 dBc with 2 X 43 dBm Inputs |
| Power Handling | 3000 W @ 1 GHz @ 25ºC |
Note: These characteristics are typical and may not apply to all connectors.
Showing all 3 results
