描述
PRODUCT OVERVIEW
The SVJ-05L-BT-01 is an SHV jack right-angle PCB mount receptacle. It brings an SHV mating interface to a printed circuit board, with the connector axis parallel to the board and a center termination directed into the PCB.
The engineering drawing specifies a non-constant impedance and a DC to 300 MHz frequency range. Working voltage is 3,500 Vrms, with a dielectric withstanding voltage of 5,000 Vrms and insulation resistance of 1,000 GΩ. These are separate electrical ratings for component selection.
Two PTFE insulators support the contact within a two-piece brass body assembly. The mating-side body and retaining ring have nickel finishes, the PCB-side body has an electroless nickel finish, and the brass contact pin has a gold finish.
The right-angle geometry includes four board mounting posts and a central contact termination. The drawing provides a recommended mounting-hole pattern for layout planning. Review board spacing, insulation, mating hardware and the assembled system against the intended voltage and operating environment.
Features
- Right-angle body supports side-entry PCB connections
- Four mounting posts locate the receptacle on the board
- Two PTFE insulators support the contact assembly
- Gold-finished brass contact; nickel-finished body components
- Dimensioned mounting-hole pattern aids board layout
Key Technical
| Attributes | Details |
|---|---|
| Impedance | Non-Constant |
| Frequency range | DC to 300 MHz |
| Working voltage | 3,500 Vrms |
| Dielectric withstanding voltage | 5,000 Vrms |
| Insulation resistance | 1,000 GΩ |
| Coupling | Bayonet |
| Temperature rating | -65 °C to +165 °C |
Applications
Potential applications for this SHV PCB receptacle include the following equipment interfaces, subject to the operating voltage, board insulation and system requirements.
- High-voltage laboratory instruments
- PCB interfaces for test equipment
- Detector-bias instrumentation
- SHV equipment development fixtures
Review the complete PCB assembly and mating arrangement for the intended application.
Interactive 3D View
Explore the connector from every angle. Drag to rotate, scroll or pinch to zoom.
Select View 3D Model to load the interactive model.
2D Drawing
Click the drawing to view the full-size image, or open the original PDF.
PRODUCT SPECIFICATIONS
| Attributes | Details |
|---|---|
| Part Number | SVJ-05L-BT-01 |
| Series | SHV |
| Gender | Jack |
| Orientation | Right angle (R/A) |
| Mounting | PCB; through-hole |
| Weight | 15.77 g |
ELECTRICAL SPECIFICATIONS
| Attributes | Details |
|---|---|
| Impedance | Non-Constant |
| Frequency range | DC to 300 MHz |
| Working voltage | 3,500 Vrms |
| Dielectric withstanding voltage | 5,000 Vrms |
| Insulation resistance | 1,000 GΩ |
MECHANICAL & MOUNTING SPECIFICATIONS
| Attributes | Details |
|---|---|
| Overall length | 28.03 mm |
| Overall height | 22.60 mm |
| PCB-side body (square) | 11.08 mm |
| Mounting post pattern (square) | 10.06 mm |
| Mounting posts | 4 × 1.02 mm square |
| PCB contact diameter | Ø0.95 mm |
| Recommended mounting holes | 4 × Ø1.65 mm (+0.15 / -0.00 mm) |
| Recommended center hole | Ø1.05 mm (+0.15 / -0.00 mm) |
| General drawing tolerances | ±0.15 mm; angles ±3.0° |
MATERIALS & FINISHES – COMPLETE DRAWING BOM
| Item | Component | Material | Finish | Qty |
|---|---|---|---|---|
| 1 | Body | Brass | Nickel | 1 |
| 2 | Insulator | PTFE | — | 1 |
| 3 | Retaining Ring | Brass | Nickel | 1 |
| 4 | Body | Brass | Electroless Nickel | 1 |
| 5 | Contact Pin | Brass | Gold | 1 |
| 6 | Insulator | PTFE | — | 1 |
ENVIRONMENTAL & COMPLIANCE INFORMATION
| Attributes | Details |
|---|---|
| Temperature rating | -65 °C to +165 °C |
PRODUCT DOCUMENTS
View technical documents for SVJ-05L-BT-01.
Data Sheet
Product overview, specifications and materials.
Product Data Sheet · PDF