설명
PRODUCT OVERVIEW
The NJ-06-BT-04 is an N-Type jack end-launch receptacle with bulkhead rear mounting. It provides a straight RF interface between a panel-mounted N-Type connection and a printed circuit board.
The assembly combines a nickel-finished brass body, nut and teeth washer with a gold-finished P.H. bronze contact pin and a PTFE insulator. The engineering drawing includes a recommended panel opening and PCB layout for integration.
The specified impedance is 50 ohms and the frequency range is DC to 11 GHz. Review the panel thickness, board layout and complete connector-to-board transition for the intended installation.
Features and Benefits
- Threaded N-Type coupling provides a secure screw-on RF connection.
- End-launch construction connects the external RF interface directly to the PCB edge.
- Bulkhead rear mounting with a nut and teeth washer supports panel installation.
- Nickel-plated brass body and mounting hardware, with a gold-plated P.H. bronze contact.
- PTFE insulation and a drawing-defined PCB layout support board integration.
Key Technical Details
| Attributes | Details |
|---|---|
| Impedance | 50 Ω |
| Frequency range | DC to 11 GHz |
| Working voltage | 500 Vrms |
| Dielectric withstand voltage | 1,500 Vrms |
| Insulation resistance | 5,000 MΩ |
| Thread | 5/8-24 UNEF-2A |
| Temperature range | −65 °C to +165 °C |
| Configuration | N-Type jack, straight end launch, bulkhead rear mount |
Applications
- Cellular base stations and wireless network infrastructure
- Satellite communication equipment and military communication systems
- Broadcast equipment and video distribution systems
- RF test equipment and instrumentation
- Defense communication links and industrial data links
- Radar equipment and systems
- Outdoor antenna systems and installations
These are typical design applications. Suitability, environmental protection and any required system qualifications must be confirmed for the intended installation.
Interactive 3D View
Explore the connector from every angle. Drag to rotate, scroll or pinch to zoom.
Select View 3D Model to load the interactive model.
2D Drawing
Click the drawing to view the full-size image, or open the original PDF.
PRODUCT SPECIFICATIONS
| Attributes | Details |
|---|---|
| Series | N-Type |
| Gender | Jack |
| Orientation | Straight |
| Mounting | End launch; bulkhead rear mount |
| Weight | 36.80 g |
ELECTRICAL SPECIFICATIONS
| Attributes | Details |
|---|---|
| Impedance | 50 Ω |
| Frequency range | DC to 11 GHz |
| Working voltage | 500 Vrms |
| Dielectric withstanding voltage | 1,500 Vrms |
| Insulation resistance | 5,000 MΩ |
MECHANICAL & MOUNTING SPECIFICATIONS
| Attributes | Details |
|---|---|
| Overall length | 32.00 mm |
| Body end (square) | 17.50 mm |
| Maximum panel thickness | 7.00 mm |
| Thread shown on drawing | 5/8-24 UNEF-2A |
| Recommended panel opening | Ø16.00 mm; 13.60 mm across flats |
| Body H cut | 13.50 mm |
| Contact diameter | Ø1.50 mm |
| Nut / washer thickness | 3.10 mm / 0.50 mm |
| Nut across flats | HEX 19.00 mm |
| General drawing tolerances | ±0.15 mm; angles ±3.0° |
MATERIALS & FINISHES – COMPLETE DRAWING BOM
| Item | Component | Material | Finish | Qty |
|---|---|---|---|---|
| 1 | Nut | Brass | Nickel | 1 |
| 2 | Teeth Washer | Brass | Nickel | 1 |
| 3 | Contact Pin | P.H. Bronze | Gold | 1 |
| 4 | Insulator | PTFE | — | 1 |
| 5 | Body | Brass | Nickel | 1 |
ENVIRONMENTAL & COMPLIANCE INFORMATION
| Attributes | Details |
|---|---|
| Temperature rating | -65 °C to +165 °C |
PRODUCT DOCUMENTS
View technical documents for NJ-06-BT-04.
Data Sheet
Product overview, specifications and materials.
Product Data Sheet · PDF
